IMPORTANT NOTE FOR WINDOWS 7 USERS:
In order for the installation to complete successfully you must take the following additional steps:
1.  Run the installer as Administrator (Right click->Run as administrator)
2.  Change the installation path to C:\Program Files (x86)\EAW\Data\UX8800.  If you use a custom installation location, enter that path as you would normally.


Janurary 11, 2011 - v1.16 - Added VFR159/129/109/89 SNGL GF Rev A, VFS250/220 SNGL NGF Rev A, VFM159/129 SNGL GF Rev A, and MW8/10 SNGL GF WHITE Rev A greyboxes.  Replaced MW15 WHITE/GREY/BLUE BI GF Rev A with Rev B, replaced MW12 WHITE/GREY/BLUE BI GF Rev B with Rev C; these greyboxes improve latency over the previous versions.

October 11, 2011 - v1.15 - Installer changes only, same greyboxes as v1.14.

July 11, 2011 - v1.14 - Replaced KF760x12 + KF761x2 TRI GF rev A and KF760x6 + KF761x2 TRI GF rev A with Rev B.  Added KF760x12 + (KF761x2) TRI GF Rev B, KF760x6 + (KF761x2) TRI GF Rev B, (KF760x12) + KF760x2 TRI GF Rev B, (KF760x6) + KF760x2 TRI GF Rev B, KF730+(KF737)x16 BI GF Rev A, and (KF730)+KF737x16 BI GF Rev A split greyboxes; speaker in parenteses is not inclued in the file.  Note: Settings do not differ from Rev A, changes are to ensure compatiblity with Lab Gruppen and Powersoft Amplifiers.  Replaced MQ1366e BI NGF Rev A with Rev B; a filter was inadvertantly bypassed.

May 13, 2011 - v1.13 - Replaced MK2326/2364/2366/2394/2396/2399 SNGL GF rev B with rev C.  Replaced MK5326/5364/5366/5394/5396/5399/8126/8196 SNGL GF rev A with rev B.  Replaced JFX88/100i/200i/290i SNGL GF rev A with rev B.  Replaced JFX260i/560i/590i SNGL rev B with rev C.  The only change in all cases was the enabling of the limiter, which had been bypassed.

March 31, 2011 - v1.12 - Replaced KF695z BI GF rev 1 with rev A.

February 1, 2011 - v1.11 - Added QX544 BI GF rev A.  Replaced QX564 BI GF rev A with rev B.  WARNING - do not use QX564 BI GF rev A.  Some necessary filters were inadvertently bypassed.

December 22, 2010 - v1.10 - Added QX118 SNGL NGF rev A, QX566 BI GF rev A, QX564 BI GF rev A, QX596 BI GF rev A, QX594 BI GF rev A greyboxes.

December 16, 2010 - v1.09 - Added JF29 BI GF rev A, JF26 BI GF rev A, JF59 BI GF rev A, JF56 BI GF rev A, KF394 BI GF rev A, KF364 BI GF rev A greyboxes.

September 30, 2010 - v1.08 - Addition of KF760x12 + KF740x6 GF rev A and KF740x10 + KF730x4 GF rev A greyboxes.

September 15, 2010 - v1.07 - Replaced KF650z TRI GF rev 1 with rev B.  Replaced KF695z TRI GF rev 5 with rev A.

August 27, 2010 - v1.06 - Addition of JF8 and JF10 greyboxes.

June 8, 2010 - v1.05 - Addition of SB1001, SB1002, SB2001, KF860 and KF861 greyboxes.

January 21, 2010 - v1.04 - Addition of KF740x6, x10 and x14 greyboxes.

November 20, 2009 - v1.03 - Addition of MWS15 Grey, Red and White greyboxes.

October 5, 2009 - v1.02 - Updated latest greyboxes to released version. Addition of KF300e, GF files.  Update to SB730 and SB1000z settings.

April 7, 2009 - v1.01 - Updated latest greyboxes to released version. Addition of JFL, KF850e, KF750, KF737, JFX, and MK series GF files.

May 23, 2008 - v1.00 - Same greyboxes as released with Pilot verion 1.0.48.  Pulled out of Pilot install and separated into folders by product family.  Added to self-extracting ZIP that will place the folders into "C:\Program Files\EAW\Data\UX8800"

Started May 23, 2008.