left Products Downloads Support Discussions About EAW
Who We Are    What We Do    Milestones    Technologies    Contact Us    News    
shim
 > Technologies
Inside EAW Technologies And Design Philosophies

  • EAW Focusing - Alignment and driver processing algorithms delivering performance comparable to premium studio monitors.
  • Beam Forming/Steering - Creation of more precise beam shapes and the ability to electronically steer them as desired.
  • Concentric Summation Array (CSA) - Precise LF & MF pattern control matching and Radial Phase Plug for symmetrical off-axis response.
  • Broadband Pattern Control - Dipolar Array Technology solves LF dispersion problems for stand-alone full-range loudspeakers.
  • Beamwidth Matched Crossover Design - Eliminates the uneven off-axis response that plagues typical two-way designs.
  • Crossover/Filter Design - Complex, asymmetrical passive crossover networks to optimize total system performance.
  • Bent Bass Horn - The size of the enclosure is minimized without minimizing sound quality and output.
  • Push/Pull Woofer Technology - Eliminates mechanically induced distortion when LF cones are driven at higher outputs.
  • Frequency Shading - Offsets the dipole action for desired dispersion of the LF drivers at the LF to HF crossover point.
  • Wave Guide Plates - Offers even, wide HF dispersion with enhanced output and pattern control for smaller systems.
  • Close Coupled Power Module™ - Self-powered loudspeakers with Close Coupled Processing for system-specific amplification.
  • Close Coupled Processing™ - EAW passive crossover/filter design philosophy applied to active signal processing.
  • Concentric Phase Aligned Array™ (CPAA) - Provides superior SPL and consistent directivity - making for very effective paging systems.
  • SuperSub - Usable LF response down to 21 Hz utilizing 12-inch transducers.
  • Radial Phase Plug - Precise aligning the transducers cone, dust cap and edge surround geometry to maintain temporal unity.
  • Divergence Shading - A superior method of achieving smooth, even SPL over longer distances.
  • Phased PointSource Technology™ - Addresses serious issues with large-scale sound reinforcement.
  • VA4 Technology™ - Significantly reduces interaction between array modules in the vertical plane.
  • Virtual Array™ - How well multiple systems work together is as important as how a single system behaves.



Contact Us | Product Information | Comment on This Page | Privacy Policy | Newsletter Sign Up
Copyright © 2011. EAW is a registered trademark of LOUD Technologies Inc. All Rights Reserved.