| JF260z |
|
Last Modified: 2002-08-15
|
- Compact 2-way system
- 12 in LF in vented enclosure
- Horn-loaded 1.4 in exit HF (60° x 45° coverage pattern)
- Flytrack, mounting points and pole mount cup included
- Switchable powering: full range passive or biamp (passive MF/HF)
- For portable use or permanent installation
- Digital signal processor required to achieve specified bi-amplified performance
|
|
| General Application |
|
| Portable |
| Install |
Size
Small/Medium |
Description
EAW's JF260z 2-way loudspeaker system provides high output, low distortion sound reinforcement for the entire range of pro audio applications. The 12 in low frequency cone and 1.4 in exit/3 in voice coil high frequency compression driver provides higher output and lower distortion plus enhanced power handling capabilities for better performance in both portable and permanently installed applications. The constant directivity HF horn provides optimized dispersion of HF information without problematic beaming. EAW's advanced beamwidth matching crossover selects a crossover point where the HF horn's beamwidth matches that of the woofer. The result is more even off-axis frequency response for more complete coverage. The JF260z offers a switchable powering mode: passive operation using the internal crossover filter network or bi-amplified operation requiring the use of pre-configured MX Series processor settings.
|
Applications
The JF260z was designed to support the widest possible range of pro audio applications. While ideal for distributed systems, the 30° per side trapezoid angles match the 60° horizontal coverage pattern allowing the creation of tight packed clusters. The pole mount cup and balance-optimized handles allow for quick and easy load-in for portable use. Its high output capabilities let it act as a main system for smaller concert or portable A/V events or even provide front or side fill for concert touring applications. The comprehensive system of integral 3/8-16 threaded mounting points permit safe, load-rated suspension in permanent installations.
|
|
Physical |
| System Configuration |
|
2-way, full range |
| Product Group |
|
J |
| LF Subsystem & Loading |
|
One 12 in woofer, vented |
| HF Subsystem & Loading |
|
One 1.4 in exit/3 in voice coil compression driver on CD horn |
| Operating Mode |
|
Switchable: passive or bi-amplified (passive LF/HF) |
| Controls (switches, knobs) |
|
Powering mode switch |
| Enclosure Material |
|
Exterior grade Baltic birch plywood |
| Finish |
|
Wear resistant textured black paint |
| Connector |
|
Two Neutrik NL4 Speakon |
| Suspension Hardware |
|
Six 3-position fly track with integral 3/8-16 mounting/suspension points
Six 3/8-16 threaded mounting/suspension points |
| Grille |
|
Powder coated perforated steel, foam backed |
| Optional Accessories 1 |
|
Fly clip with ring, (0001386) |
| Optional Accessories 2 |
|
3/8-16 forged shoulder eyebolt, (104001) |
Dimensions (±0.13 in / ±3 mm) |
|
|
| Height |
|
22.25 / 565 |
| Front Width |
|
13.68 / 347 |
| Rear Width |
|
4.02 / 102 |
| Depth |
|
15.25 / 387 |
| Trapezoid Angle (degrees) |
|
30 per side |
Weights (pounds / kilograms) |
|
|
| Net Weight |
|
67.0 / 30.5
|
| Shipping Weight |
|
74.0 / 33.6 |
Performance |
| Frequency Response |
|
|
| ±3 db |
|
67 Hz to 18 kHz |
| -10 dB |
|
55 Hz |
| Recommended High-Pass Frequency |
|
50 Hz, 24 dB / octave |
Axial Sensitivity (dB SPL, 1 watt @ 1 m) |
|
|
| Full Range Passive |
|
97 |
| LF |
|
96 |
| HF |
|
105 |
Nominal Input Impedance (ohms) |
|
|
| Full Range Passive |
|
8 |
| LF |
|
8 |
| HF |
|
16 |
Power Handling (watts, continuous) |
|
|
| Full Range Passive |
|
500 |
| LF |
|
500 |
| HF |
|
200 |
Calculated SPL Limit (referenced to 1 m) |
|
|
| Full Range Passive Peak |
|
130.0 |
| LF Peak |
|
130.0 |
| HF Peak |
|
134.0 |
| Full Range Long Term |
|
124.0 |
| LF Long Term |
|
123.0 |
| HF Long Term |
|
128.0 |
| Nominal Dispersion (degrees @ - 6 dB) |
|
|
| Horizontal |
|
60° |
| Vertical |
|
45° |
|
|
