left Products Downloads Support Discussions About EAW
Loudspeakers    Commercial Products    Amplifiers    Digital Products    Custom Products    Legacy Products    
shim
   > JFL Series
 
JFL Series

The JFL210 compact line array module features a range of EAW’s most innovative  line array technologies within a mobile, light weight package that’s an ideal solution for a multitude of small- and medium-sized applications, including portable and installed A/V as well as musician/DJ. 

Incorporating constant curvature line array design principles, JFL210 modules form easily configured arrays with very predictable output and coherence and coverage that is both horizontally symmetric and consistent from short to long throws. And despite the compact size, modules and arrays both deliver exceptionally high output capability and predictable pattern control.

The JFL210 can be flown or stacked in a variety of ways. The enclosure size, shape, weight, and rigging are optimized for ease of transport and handling.  Arrays may be easily flown or ground stacked, and up to two enclosures may be mounted on a tripod loudspeaker stand or on a pole above the JFL118 subwoofer (coming soon).

Each two-way, full-range JFL210 module utilizes neodymium drivers that provide optimum performance and tireless durability while also further reducing weight. Two 10 inch (2.5 inch voice coil) woofers deliver tight, punchy low-frequency performance, while the 3 inch (1.4 inch-exit) compression driver is closely matched with a horn that provides precise directivity. These high end components contribute to a maximum peak output of more than 130 dB SPL, allowing JFL210 arrays to comfortably fill vast spaces.

Performance can be optimized even more precisely with an EAW UX8800 digital processor (4 inputs by 8 outputs) that functions as an excellent overall system manager, processor and controller, while its EAW Focusing alignment and driver processing algorithms dramatically enhance JFL210 line array performance.

Dual Neutrik® Speakon® STX Series jacks are provided on each JFL210. The STX Series’ all-metal housings are extremely rugged, and provide weather protection to IP54 when mated with a complimentary STX Series cable connector. The input panel also houses recessed powering mode and HF Shading switched.  Both are shrouded with a rubber boot for weather protection.

Yes, it’s extremely small and light and easy to handle, but make no mistake – the JFL210 packs an unmatched performance punch in comparison to any other loudspeaker system in its class.


JFL210
  • Ideal for a wide range of portable and installed AV applications
  • Constant curvature line array
  • Extremely small and light
  • SI Dimensions/ Weight: 314.H x 631 W x 397 D mm / 23.6 kg
  • US Dimensions/Weight: 12.4 H x 24.8 W x 15.6 D in / 52 lb
  • Neodymium drivers for superior performance and durability while reducing weight
  • Nominal beamwidth: 110° horizontal and 15° vertical
  • Vertical arrays of up to six units can be easily constructed
  • User switchable single- and bi-amp modes
  • HF Shading switch optimized array high frequency response in single-amp powering mode
  • Optimized for transport by just one person
  • EAW UX8800 with EAW Focusing further enhances performance and control
  • Very easy to pole mount, fly and ground stack
  • Integral, high-strength rigging system’s 10:1 design factor provides confidence in all flying applications
  • Enclosures protected by EAW’s tough RoadCoat finish
JFL118
  • JFL210 companion subwoofer.
  • Simple-to-use rigging allows flown and ground-stacked arrays to be constructed with ease.
  • Built to EAW construction standards: rugged enclosure, sturdy finish and reinforced steel grille stands up to road abuse.
  • Ideal for a wide range of portable and installed AV applications.



Contact Us | Product Information | Comment on This Page | Privacy Policy | Newsletter Sign Up
Copyright © 2011. EAW is a registered trademark of LOUD Technologies Inc. All Rights Reserved.