| MQ2364e |
|
Last Modified: 2002-08-07
|
- Dedicated horn-loaded MF/HF array module
- (2)10 in MF w/ Radial Phase PlugT; (1)2 in exit Neodymium HF
- 60° x 40° beamwidth
- Vertically configured to create horizontal arrays
|
|
| General Application |
|
| Install |
Size
Medium/Large |
Description
A dedicated mid/high system in a vented trapezoidal enclosure.
Includes two horn-loaded 10 in MF cones with Radial
Phase PlugT and a 2 in exit/3 in diaphragm neodymium
compression driver. The MF and HF horns provide a nominal
60° x 40° beamwidth. An internal passive crossover with
jumpers on the input panel allows user selection of either
bi-amplified or passive operation. In either case digital signal
processing is required to achieve specified performance.
The enclosure features a comprehensive system of 3/8-16
threaded suspension points.
|
Applications
The MQ2364e employs a no-compromise design where the
mid and high frequency horns are truly large enough to provide
optimal pattern control throughout each passband. The
horns feature a rigid but well-damped construction using
wood veneer backed by structural foam. The MQ2364e has
been designed to work with a complementary MQ2300 Series
LF loudspeaker to create a full range audio system, but may
also be used without a LF complement for voice-only applications.
Dual MF components produce greater output than
MQ1300 Series products. The enclosure is vertically configured
for arraying in horizontal rows. Horizontal arrays are
typically used in venues such as houses of worship, where
the array must address wide, fan-shaped audiences.
|
|
Physical |
| System Configuration |
|
2-way, mid/high |
| Product Group |
|
M |
| MF Subsystem & Loading |
|
Two 10 in cones, horn-loaded |
| HF Subsystem & Loading |
|
One 2 in exit/3 in voice coil compression driver on CD horn |
| Operating Mode |
|
Switchable: passive or bi-amplified (passive MF/HF) |
| Controls (switches, knobs) |
|
Powering mode jumper wires |
| Enclosure Material |
|
Exterior grade Baltic birch plywood |
| Finish |
|
Wear resistant textured black paint |
| Connector |
|
Two 6-contact terminal strips with jumpers for powering configuration |
| Suspension Hardware |
|
Sixteen 3/8-16 mounting/suspension points |
| Grille |
|
Powder coated perforated steel |
| Companion LF |
|
MQ2315, MQ2412, MQTD415 |
Dimensions (±0.13 in / ±3 mm) |
|
|
| Height |
|
54.00 / 1372 |
| Front Width |
|
32.00 / 813 |
| Rear Width |
|
8.12 / 206 |
| Depth |
|
25.61 / 650 |
| Trapezoid Angle (degrees) |
|
25 per side |
Weights (pounds / kilograms) |
|
|
| Net Weight |
|
200.0 / 90.9
|
| Shipping Weight |
|
213.0 / 96.8 |
Performance |
| Frequency Response |
|
|
| ±3 db |
|
250 Hz to 15 kHz |
| -10 dB |
|
200 Hz |
| Recommended High-Pass Frequency |
|
200 Hz, 24 dB / octave |
Axial Sensitivity (dB SPL, 1 watt @ 1 m) |
|
|
| Passive (MF/HF) (when bi-amped) |
|
106 |
| MF |
|
109 |
| HF |
|
107 |
Nominal Input Impedance (ohms) |
|
|
| Passive (MF/HF) |
|
4 |
| MF |
|
4 |
| HF |
|
8 |
Power Handling (watts, continuous) |
|
|
| Passive (MF/HF) |
|
625
|
| MF |
|
800 |
| HF |
|
150 |
Calculated SPL Limit (referenced to 1 m) |
|
|
| Passive (MF/HF) Peak |
|
140.0 |
| MF Peak |
|
144.0 |
| HF Peak |
|
135.0 |
| Passive (MF/HF) Long term |
|
134.0 |
| MF Long Term |
|
138.0 |
| HF Long Term |
|
129.0 |
| Nominal Dispersion (degrees @ - 6 dB) |
|
|
| Horizontal |
|
60° |
| Vertical |
|
40° |
|
|
