left Products Downloads Support Discussions About EAW
Loudspeakers    Commercial Products    Amplifiers    Digital Products    Smaart    Custom Products    Legacy Products    
shim
MQM1394e

Last Modified: 2002-08-07
  • Dedicated horn loaded MF/HF array module
  • 10 in MF; 1.4 in exit Neodymium HF compression driver 90° x 45° beamwidth
  • Switchable passive/bi-amp powering
  • MQ performance in a smaller package


MQM1394e
General Application


  PHOTOS
  DOWNLOADS
Install

Size
Medium/Large

Description
The MQM1394e uses a specially designed 10 in MF cone with EAW's patented Radial Phase PlugT and a 1.4 in exit/3 in voice coil neodymium HF compression driver. The MF and HF horns provide a nominal 90 x 45 beamwidth. An internal passive crossover with jumpers on the input panel allow user selection of either bi-amplified or passive operation. In either case digital signal processing is required to achieve specified performance. The enclosure is vertically configured for arraying in horizontal rows, and features a comprehensive system of 3/8-16 threaded suspension points.

Applications
The MQM1394e adapts the original MQ Series approach for use in somewhat smaller enclosures. Enclosure dimensions are significantly reduced without sacrificing overall performance. The MQM Series comprises matched sets of mid/high and low frequency enclosures with complementary dimensions. This facilitates creating attractive arrays that provide high definition sound within tightly controlled coverage areas.


Physical

System Configuration   2-way, mid/high
Product Group   M
MF Subsystem & Loading   One 10 in cone, horn-loaded
HF Subsystem & Loading   One 1.4 in exit/3 in voice coil compression driver on CD horn
Operating Mode   Switchable: passive or bi-amplified (passive MF/HF)
Enclosure Material   Exterior grade Baltic birch plywood
Finish   Wear resistant textured black paint
Connector   Two 6-contact terminal strips with jumpers for powering configuration
Suspension Hardware   Sixteen 3/8-16 mounting/suspension points
Grille   Powder coated perforated steel
Companion LF   MQM1215

Dimensions (±0.13 in / ±3 mm)
   
Height   31.00 / 787
Front Width   24.62 / 625
Rear Width   8.05 / 204
Depth   20.00 / 508
Trapezoid Angle (degrees)   22.5 per side

Weights (pounds / kilograms)
   
Net Weight   110.0 / 50.0
Shipping Weight   123.0 / 55.9

Performance

Frequency Response    
±3 db   350 Hz to 15 kHz
-10 dB   200 Hz
Recommended High-Pass Frequency   200 Hz, 24 dB / octave

Axial Sensitivity (dB SPL, 1 watt @ 1 m)
   
Passive (MF/HF) (when bi-amped)   107
MF   107
HF   107

Nominal Input Impedance (ohms)
   
Passive (MF/HF)   8
MF   8
HF   8

Power Handling (watts, continuous)
   
Passive (MF/HF)   325
MF   400
HF   150

Calculated SPL Limit (referenced to 1 m)
   
Passive (MF/HF) Peak   138.0
MF Peak   139.0
HF Peak   135.0
Passive (MF/HF) Long term   132.0
MF Long Term   133.0
HF Long Term   129.0
Nominal Dispersion (degrees @ - 6 dB)    
Horizontal   90°
Vertical   45°



Contact Us | Product Information | Comment on This Page | Privacy Policy | Newsletter Sign Up

Copyright © 2008 LOUD Technologies Inc. All Rights Reserved.