 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Loudspeakers Commercial Products Amplifiers Digital Products Smaart Custom Products Legacy Products |
 |
 |
 |
 |
|
|
|
|
UMX.96 Specifications
|
|
| Specification |
Value |
Notes |
| INPUT POWER |
1100W, 100-240V AC, 47-63 Hz |
(dual redundant standard) |
| SAMPLE RATES |
44.1k, 48k, 88.2k, 96k |
|
FADERS |
100mm motorized optical P & G
48 input + 8 VCA + 3 LRC + 1 selected channel
1024 steps, - inf to + 10dB |
|
LATENCY |
3.1ms, speaker processor bypassed
3.6ms, speaker processor engaged
|
(both analog mic in to
analog main out) |
DSP RESOLUTION |
32 and 40-bit floating point |
|
FREQUENCY RESPONSE |
20Hz -20kHz, +/-0.5dB |
|
THD + N |
<0.004% 20hz-20khz mic in to insert send
<0.015% 20hz-20khz mic in to main out |
typical use:
input = -15 dBu
mic gain = +31 dB |
DYNAMIC RANGE |
DA: 110 dB, main out @ 96kHz
AD+DA: 105 dB, mic in to main out @ 96kHz
DA: 114 dB main out @ 48kHz
AD+DA: 109 dB, mic in to main out @ 48kHz
(All measurements A-weighted) |
up to +45 dB mic gain
up to +45 dB mic gain |
VOLTAGE GAIN |
105 dB - input analog + digital trim + input channel fader gain + main out fader gain |
|
RESIDUAL OUTPUT NOISE |
-88 dBu A-weighted at 96K
-92 dBu A-weighted at 48K |
all inputs muted |
PHANTOM POWER |
+48V |
digitally controlled on individual channels |
MAX INPUT LEVEL |
Mic inputs 30 dBu pad in, 7 dBu pad out
All other inputs 22 dBu |
|
| PAD |
23 dB |
digitally controlled |
MIC PRE GAIN |
+15 to +70 dB, 1 dB steps
-8 to +47 dB, 1 dB steps
|
|
INPUT IMPEDANCE |
1.5k Ohm, mic in, pad out
3.1k Ohm, mic in, pad engaged
10k Ohm, inserts, returns, and stereo inputs |
|
EIN |
-130 dBu, 150 Ohm source impedance
-127 dBu, any source impedance |
pad out
pad in
|
|
|
|
*Note: All specifications subject to change
|
| |
|
|
|
> UMX.96
