A user may select single- or bi-amp powering mode on the rear panel.  An additional HF Shading switch is active in single-amp mode.  It optimizes high frequency response for single-box or multi-box arrays, or inserts a correction filter for the high frequency air loss encountered in long throw applications. When the JFL210 is operated in bi-amp power mode the HF Shading filters are applied in DSP.

The JFL210’s size, shape and weight are optimized for transport and set-up by one person. Side handles are integrated with the rigging system and are aligned with the enclosure’s center or gravity for superior balance and stability.  Up to two JFL210s may be mounted on a loudspeaker stand with a 35 mm / 1.38 in diameter pole.  Dual –angle, integral pole mount holes allow the bottom enclosure to be aimed 0° or -15°.

The JFL210’s ultra-strong rigging system has a 10:1 design factor, which meets or exceeds all standards enforced throughout the world. The rigging is simple to use – enclosures may be easily joined together by one person using but one hand. For portable, flown applications the accessory FB121 Fly Bar allows a wide range of array tilt angles to be readily achieved.  The FB121 also doubles as a ground stack base for up to four JFL210s. Alternately, pair of threaded M10 rigging points are available on the enclosure’s top and bottom panels for cost-sensitive permanent install applications.

Overall construction matches the high standards long applied to EAW portable and touring products. Enclosures are protected by our tough, highly scratch-resistant RoadCoat finish and durable, foam-backed steel grilles protect the transducers while hiding them from view.