EAW Adds New Line Array And Subwoofer To RADIUS Series Of Loudspeakers
Eastern Acoustics Works (EAW) is proud to announce the addition of the RSX212L line array module and RSX18F subwoofer. The two new RADIUS products provide added versatility to the series designed for both touring and permanent install applications. Both products will be presented at EAW’s InfoComm Booth C352 and Demo Room N116 in Las Vegas.
Similar to the other products in the RADIUS Series, the RSX212L and RSX18F utilize EAW’s proprietary Focusing and Dyno technologies to deliver immaculate impulse response throughout the coverage area even at the highest output levels. The accompanying EAWmosaic applications tackles prediction, control and monitoring for all RADIUS enclosures. For added convenience, EAW’s Resolution software can also be utilized for prediction of all Radius products.
The new, two-way RSX212L line array module is loaded with two 12-inch low frequency drivers and two 1.7-inch voice coil compression drivers. Like the smaller RSX208L line array, the RSX212L includes array self-detection via on-board infrared sensor and accelerometers that enables EAW’s OptiLogic technology to pre-optimize the array to reduce setup and tuning time. The RSX212L features three-point rigging, a new flybar, caster pallet and cover designed for quick deployment and pack down.
The new RSX18F is a single 18-inch, flyable, low frequency module that offers automatic cardioid functionality, in stacks of two or greater, via OptiLogic. The subwoofer provides significant low-end support for all full-range products in the RADIUS Series and can be flown with the companion RSX208L line array module via a new accessory adapter.
The entire RADIUS Series features all-wood enclosures, EAW Roadcoat finish, Power Factor Corrected Class D amplification and a rear-panel LCD screen and encoder to provide on-box access to all RADIUS functions. Dual locking etherCON connectors offer daisy-chain Dante connectivity for single cable audio and communications. There is also an integrated wireless router connection on every RADIUS loudspeaker that delivers router placement options. Analog input option and automatic fail-over redundancy is managed with XLR audio input and thru connections. Power is delivered via powerCON inlet and loop connections.