JFL118

SUBWOOFER

The JFL118 is a light weight, high-powered, flyable, single 18-inch subwoofer that extends the low frequency response of the companion JFL210 or JFL213 full range line array loudspeakers. JFL118 subwoofers may be ground stacked, flown as part of a JFL210 or JFL213 array or flown separately alongside a JFL210 or JFL213 array. Integral, proprietary rigging will suspend up to six of any combination of JFL118 and JFL210/ JFL213 enclosures with a 10:1 design factor. The optional FB221 fly bar includes multiple suspension points that allow users to easily set an array’s tilt angle. The JFL118 also includes M10 threaded suspension points that allow users to deploy arrays in permanently installed applications by means of cost-effective, forged shoulder eyebolts.

The JFL118 includes a metal cup that allows up to two JFL210 or JFL213 main channel loudspeakers to be pole mounted above up to two stacked JFL118’s. Alternately, JFL210 or JFL213 loudspeakers may be stacked directly atop the JFL118. In this instance, all enclosures lock together using their integral rigging.

JFL118 subwoofers utilize Neutrik® Speakon® STX Series connectors. The STX Series’ all-metal housings are extremely rugged, and feature a built-in gasket providing weather protection to IP54 when used with companion NLT4FX in-line cable connectors. The rear of each JFL118 features three NL4 connectors. Two are used for subwoofer and optional high passed signal input, while the third is used as an output to loop the high-passed signal to JFL210’s, JFL213’s or other loudspeakers.

Six year warranty.

  • The JFL118 is the companion subwoofer to the JFL210 and JFL213. The JFL118’s simple-to-use rigging solution allows users to construct flown and ground stacked arrays with ease.
  • The JFL118 is built to EAW construction standards with its rugged enclosure, sturdy finish and reinforced steel grille to stand up to life on the road.
  • The JFL subwoofer offers an excellent choice for a wide range of portable and installed AV applications.
JFL118

The JFL118 is a light weight, high-powered, flyable, single 18-inch subwoofer that extends the low frequency response of the companion JFL210 or JFL213 full range line array loudspeakers. JFL118 subwoofers may be ground stacked, flown as part of a JFL210 or JFL213 array or flown separately alongside a JFL210 or JFL213 array. Integral, proprietary rigging will suspend up to six of any combination of JFL118 and JFL210/ JFL213 enclosures with a 10:1 design factor. The optional FB221 fly bar includes multiple suspension points that allow users to easily set an array’s tilt angle. The JFL118 also includes M10 threaded suspension points that allow users to deploy arrays in permanently installed applications by means of cost-effective, forged shoulder eyebolts.

The JFL118 includes a metal cup that allows up to two JFL210 or JFL213 main channel loudspeakers to be pole mounted above up to two stacked JFL118’s. Alternately, JFL210 or JFL213 loudspeakers may be stacked directly atop the JFL118. In this instance, all enclosures lock together using their integral rigging.

JFL118 subwoofers utilize Neutrik® Speakon® STX Series connectors. The STX Series’ all-metal housings are extremely rugged, and feature a built-in gasket providing weather protection to IP54 when used with companion NLT4FX in-line cable connectors. The rear of each JFL118 features three NL4 connectors. Two are used for subwoofer and optional high passed signal input, while the third is used as an output to loop the high-passed signal to JFL210’s, JFL213’s or other loudspeakers.

Six year warranty.

  • The JFL118 is the companion subwoofer to the JFL210 and JFL213. The JFL118’s simple-to-use rigging solution allows users to construct flown and ground stacked arrays with ease.
  • The JFL118 is built to EAW construction standards with its rugged enclosure, sturdy finish and reinforced steel grille to stand up to life on the road.
  • The JFL subwoofer offers an excellent choice for a wide range of portable and installed AV applications.

Specifications

Subsystem

Transducer: SUB 1x 18 in. cone
Loading: Vented

Operating Mode

Amplifier Channels: Single-amp LF
External Signal Processing: DSP w/1-way filter

Operating Range

30 – 150

Axial Sensitivity (1W @ 1m, dB SPL)

Sub: 94

Power Handling/Impedance (Watts @ Ohms)

Sub – Single Amp: 800 @ 8

Calculated Maximum Output Peak (dB SPL)

Sub (whole space): 129

Calculated Maximum Output Long Term (dB SPL)

Sub (whole space): 123

Powering

Single

Versions

JFL118 0030529-90

Accessories

Fly Bar Black FB221 0031170
Caster Kit CSTR118 0032377-90
M10 x 1.5 Forged Shoulder Eyebolt 0029818
SPM200 Adjustable Loudspeaker Pole 2035170-02

Dimensions (inches/millimeters)

Height: 24.80/631
Width: 19.80/502
Depth: 29.10/740

Weights (pounds/kilograms)

Net: 98/44.5
Shipping: 114/51.7

JFL Series SERIES

JFL118

SUBWOOFER

Operating Range

30 – 150

Calculated Maximum Output Peak

Sub (whole space): 129

Power Handling/Impedance (Watts @ Ohms)

Sub – Single Amp: 800 @ 8

Subsystems

Transducer: SUB 1x 18 in. cone, Loading: Vented

Weight (lb. / kg)

Net: 98/44.5

Dimensions (imperial / metric)

Height: 24.80/631, Width: 19.80/502, Depth: 29.10/740

JFL213

2-WAY FULL-RANGE LINE ARRAY MODULE

Operating Range

65 – 20k

Calculated Maximum Output Peak

LF: 131, HF: 130, Full Range: 130

Power Handling/Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 80 @ 16, Full Range: 800 @ 8

Subsystems

LF: 2x 10-in cone, vented, HF: 3x .75-in exit compression driver, horn-loaded

Weight (lb. / kg)

Net: 62/28

Dimensions (imperial / metric)

Height: 12.37/314, Width: 24.84/631, Depth: 15.64/397, Trap. Angle (degrees top and bottom): 7.5

Talk to EAW

Got a general enquiry? Looking for design help? Want to locate spare parts? We’re ready to talk. Help. And make sure you’re happy.