MK5366i

passive 3-way full-range loudspeaker

The MK5300i Series of 2-way, high output, trapezoidal loudspeaker systems are designed as main PA elements for smaller venues, including small houses of worship and auditoriums/theaters, corporate A/V systems, hotel ballrooms and meeting rooms. The Series is also excellent for distributed or fill purposes in larger venues, including large houses of worship and auditoriums/theaters, arenas, stadiums, nightclubs, and themed-entertainment complexes.

To meet the design goals for the intended applications, EAW engineers developed a new, high performance, 3-inch voice coil, 1.4-in exit compression driver, loading it with a selection of six different HF horns with coverage patterns ranging from 60° x 45° to 120° x 60°. The horns are as large as the enclosure size allows to maintain consistent directivity throughout the HF passband. A 3-inch voice coil, 15-inch LF driver was used to complement the sonic character and output of the HF driver. All MK5300i models are carefully voiced to sound similar, permitting diverse horn patterns to be mixed throughout an installation while maintaining the same sonic quality. The result is clean, high-fidelity output at significantly higher levels than would be expected from loudspeakers of this size and price.
Users can select between single-amp and bi-amp (external processor) operating modes. In either operating mode, EAW’s beamwidth-matching crossover/ filter design delivers even power response throughout the crossover region, eliminating the discontinuities that plague other two-way loudspeakers.

The MK5300i Series systems are the larger companions to the MK2300i Series systems. Enclosures for both series are the same height, facilitating installation where more than one horn pattern and/or type of loudspeaker capability is needed. In addition, SBK Series subwoofers also share this height, creating attractive arrays that use EAW’s preconfigured accessory flybar.

MK5366i

The MK5300i Series of 2-way, high output, trapezoidal loudspeaker systems are designed as main PA elements for smaller venues, including small houses of worship and auditoriums/theaters, corporate A/V systems, hotel ballrooms and meeting rooms. The Series is also excellent for distributed or fill purposes in larger venues, including large houses of worship and auditoriums/theaters, arenas, stadiums, nightclubs, and themed-entertainment complexes.

To meet the design goals for the intended applications, EAW engineers developed a new, high performance, 3-inch voice coil, 1.4-in exit compression driver, loading it with a selection of six different HF horns with coverage patterns ranging from 60° x 45° to 120° x 60°. The horns are as large as the enclosure size allows to maintain consistent directivity throughout the HF passband. A 3-inch voice coil, 15-inch LF driver was used to complement the sonic character and output of the HF driver. All MK5300i models are carefully voiced to sound similar, permitting diverse horn patterns to be mixed throughout an installation while maintaining the same sonic quality. The result is clean, high-fidelity output at significantly higher levels than would be expected from loudspeakers of this size and price.
Users can select between single-amp and bi-amp (external processor) operating modes. In either operating mode, EAW’s beamwidth-matching crossover/ filter design delivers even power response throughout the crossover region, eliminating the discontinuities that plague other two-way loudspeakers.

The MK5300i Series systems are the larger companions to the MK2300i Series systems. Enclosures for both series are the same height, facilitating installation where more than one horn pattern and/or type of loudspeaker capability is needed. In addition, SBK Series subwoofers also share this height, creating attractive arrays that use EAW’s preconfigured accessory flybar.

Specifications

Subsystem

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Operating Mode

Amplifier Channels: Single-amp LF/HF; Bi-amp LF, HF
External Signal Processing: High pass filter; DSP w/2-way filters

Operating Range (-10 dB, Hz)

48Hz – 17KHz

Axial Sensitivity (1W @ 1m, dB SPL)

LF: 98
HF: 105
Full Range: 98

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8
HF: 150 @ 8
Full Range: 800 @ 8

Calculated Maximum Output Peak (dB SPL)

LF: 133
HF: 133
Full Range: 133

Calculated Maximum Output Long Term (dB SPL)

LF: 127
HF: 127
Full Range: 127

Nominal Coverage (degrees)

Horizontal: 60
Vertical: 60

Powering

Switchable: bi-amplified/passive

Versions

MK5366i Black 2040046
MK5366i White 2040047
MK5366i-WP Black 2040048

Accessories

Eye Bolt 0.375-16 X 1.25 in, ACC-EB3825 104001
U-Bracket MK2(5)000 Black, UBKT2353 0007869
U-Bracket MK2(5)000 White, UBKT2353 0015076
Flybar SBK-MK53 VFS-VFR159 Black, FB5VSK 2038320

Dimensions (inches/millimeters)

Height: 30.00/762
Width (front): 18.71/475
Width (rear): 8.88/226
Depth: 19.73/501
Trap. Angle (degrees per side): 15

Weights (pounds/kilograms)

Net: 77/34.9
Shipping: 87/39.5

MK Series SERIES

MK2326i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

65Hz – 18KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 600 @ 8, HF: 150 @ 8, Full Range: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 120, Vertical: 60

Subsystems

Transducer: LF – 1x 12 in. cone;  HF – 1x 1.4 in. exit, 3 in. voice coil compression driver, Loading: LF – Vented; HF – Horn-loaded

Weight (lb. / kg)

Net: 60/27.2

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 15.54/394.7, Width (rear): 8.75/222, Depth: 14.75/374.7, Trap. Angle (degrees per side): 15

MK2366i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

65 – 17k

Power Handling / Impedance (Watts @ Ohms)

LF: 600 @ 8, HF: 150 @ 8, Full Range: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 60, Vertical: 60

Subsystems

Transducer: LF – 1x 12 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 60/27.2

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 15.54/394.7, Width (rear): 8.75/222, Depth: 14.75/374.7, Trap. Angle (degrees per side): 15

MK2394i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

65Hz to 19KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 600 @ 8, HF: 150 @ 8, Full Range: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 45

Subsystems

Transducer: LF – 1x 12 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Weight (lb. / kg)

Net: 60/27.2

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 15.54/394.7, Width (rear): 8.75/222, Depth: 14.75/374.7,
Trap. Angle (degrees per side): 15

MK2396i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

65 – 20k

Power Handling / Impedance (Watts @ Ohms)

LF: 600 @ 8, HF: 150 @ 8, Full Range: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF – 1x 12 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 60/27.2

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 15.54/394.7, Width (rear): 8.75/222, Depth: 14.75/374.7,
Trap. Angle (degrees per side): 15

MK2399i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

65 – 18k

Power Handling / Impedance (Watts @ Ohms)

LF: 600 @ 8, HF: 150 @ 8, Full Range: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 90. Vertical: 90

Subsystems

Transducer: LF – 1x 12 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 60/27.2

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 15.54/394.7, Width (rear): 8.75/222, Depth: 14.75/374.7, Trap. Angle (degrees per side): 15

MK5326i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

48Hz – 17KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 120, Vertical: 60

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK5364i

passive 3-way full-range loudspeaker

Operating Range

48 – 17k

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 60, Vertical: 45

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified or passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK5366i

passive 3-way full-range loudspeaker

Operating Range

48Hz – 17KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 60, Vertical: 60

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK5394i

passive 3-way full-range loudspeaker

Operating Range

48Hz – 16KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 45

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK5396i

passive 3-way full-range loudspeaker

Operating Range

48Hz – 19KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK5399i

passive 3-way full-range loudspeaker

Operating Range

48Hz – 18KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 90

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK8126i

120×60 PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

60Hz – 18KHz

Power Handling / Impedance (Watts @ Ohms)

Full Range: 300 @ 8

Nominal Coverage (degrees)

Horizontal: 120, Vertical: 60

Subsystems

Transducer: LF – 1x 8 in. cone; HF – 1x 1-in exit/1.5-in voice coil compression driver on CD horn, Loading: LF – Vented; HF – Horn-loaded

Powering

Full range

Weight (lb. / kg)

Net: 31/14.1

Dimensions (inches/millimeters)

Height: 19.75/502, Width (front): 11.75/299, Width (rear): 6.00/152, Depth: 11.03/280, Trap. Angle (degrees per side): 22.5

MK8196i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

60Hz – 18KHz

Power Handling / Impedance (Watts @ Ohms)

Full Range: 300 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF – 1x 8 in. cone; HF – 1x 1-in exit/1.5-in voice coil compression driver on CD horn, Loading: LF – Vented; HF – Horn-loaded

Powering

Full range

Weight (lb. / kg)

Net: 31/14.1

Dimensions (inches/millimeters)

Height: 19.75/502, Width (front): 11.75/299, Width (rear): 6.00/152, Depth: 11.03/280, Trap. Angle (degrees per side): 22.5

Talk to EAW

Got a general enquiry? Looking for design help? Want to locate spare parts? We’re ready to talk. Help. And make sure you’re happy.