MK8196i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

The MK8126i two-way loudspeaker system sets the new standard in installation performance by solving the chronic problems of compact two-way loudspeakers. Yet it’s size is actually smaller than many of the compact two-ways it outperforms.

The HF horn loading the 1-in exit/1.5-in voice coil compression driver is larger than most traditional compact two-way horns. This extends pattern control lower into the midrange than would otherwise be possible and allows the horn’s pattern to overlap the woofer’s pattern in the critical crossover area.

Advanced beamwidth matching crossover point selection transitions between the subsystems exactly where the HF horn’s 120° (h) x 60° (v) coverage pattern matches the woofer’s pattern. This eliminates the beamwidth mismatch that creates off-axis voids in the crossover area of traditional two-way systems.

The internal passive crossover/filter network uses complex, asymmetrical slopes to integrate the subsystems and goes beyond merely dividing the signal to perform critical equalization functions.

  • System includes an 8-in woofer and a 1-in exit/1.5-in voice coil compression driver on a 120° x 60° CD horn
  • Internal passive crossover/filter network allows powering by a single amp channel while smoothing power response
  • Beamwidth optimized crossover points eliminate off-axis voids through crossover
  • User-rotatable horn lets you “rotate the enclosure around the horn” to mount them vertically or horizontally
MK8196i

The MK8126i two-way loudspeaker system sets the new standard in installation performance by solving the chronic problems of compact two-way loudspeakers. Yet it’s size is actually smaller than many of the compact two-ways it outperforms.

The HF horn loading the 1-in exit/1.5-in voice coil compression driver is larger than most traditional compact two-way horns. This extends pattern control lower into the midrange than would otherwise be possible and allows the horn’s pattern to overlap the woofer’s pattern in the critical crossover area.

Advanced beamwidth matching crossover point selection transitions between the subsystems exactly where the HF horn’s 120° (h) x 60° (v) coverage pattern matches the woofer’s pattern. This eliminates the beamwidth mismatch that creates off-axis voids in the crossover area of traditional two-way systems.

The internal passive crossover/filter network uses complex, asymmetrical slopes to integrate the subsystems and goes beyond merely dividing the signal to perform critical equalization functions.

  • System includes an 8-in woofer and a 1-in exit/1.5-in voice coil compression driver on a 120° x 60° CD horn
  • Internal passive crossover/filter network allows powering by a single amp channel while smoothing power response
  • Beamwidth optimized crossover points eliminate off-axis voids through crossover
  • User-rotatable horn lets you “rotate the enclosure around the horn” to mount them vertically or horizontally

Specifications

Subsystem

Transducer: LF – 1x 8 in. cone; HF – 1x 1-in exit/1.5-in voice coil compression driver on CD horn
Loading: LF – Vented; HF – Horn-loaded

Operating Mode

Amplifier Channels: Single-amp LF/HF
External Signal Processing: High pass filter; DSP w/2-way filters

Operating Range (-10 dB, Hz)

60Hz – 18KHz

Axial Sensitivity (1W @ 1m, dB SPL)

Full Range: 95

Power Handling / Impedance (Watts @ Ohms)

Full Range: 300 @ 8

Calculated Maximum Output Peak (dB SPL)

Full Range: 126

Calculated Maximum Output Long Term (dB SPL)

Full Range: 120

Nominal Coverage (degrees)

Horizontal: 90
Vertical: 60

Powering

Full range

Versions

MK8196i Black 0031636
MK8196i White 0031663
MK8196iMT 128W Black 0031695
MK8196iMT 128W White 0031700
MK8196iMTPL-WP 128W Black 2036432
MK8196iPL-WP Black 2035763

Accessories

U-Bracket MK8100 Black, UBKT81 0015344
U-Bracket MK8100 White, UBKT81 0015829

Dimensions (inches/millimeters)

Height: 19.75/502
Width (front): 11.75/299
Width (rear): 6.00/152
Depth: 11.03/280
Trap. Angle (degrees per side): 22.5

Weights (pounds/kilograms)

Net: 31/14.1
Shipping: 34/15.5

MK Series SERIES

MK2326i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

65Hz – 18KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 600 @ 8, HF: 150 @ 8, Full Range: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 120, Vertical: 60

Subsystems

Transducer: LF – 1x 12 in. cone;  HF – 1x 1.4 in. exit, 3 in. voice coil compression driver, Loading: LF – Vented; HF – Horn-loaded

Weight (lb. / kg)

Net: 60/27.2

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 15.54/394.7, Width (rear): 8.75/222, Depth: 14.75/374.7, Trap. Angle (degrees per side): 15

MK2366i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

65 – 17k

Power Handling / Impedance (Watts @ Ohms)

LF: 600 @ 8, HF: 150 @ 8, Full Range: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 60, Vertical: 60

Subsystems

Transducer: LF – 1x 12 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 60/27.2

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 15.54/394.7, Width (rear): 8.75/222, Depth: 14.75/374.7, Trap. Angle (degrees per side): 15

MK2394i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

65Hz to 19KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 600 @ 8, HF: 150 @ 8, Full Range: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 45

Subsystems

Transducer: LF – 1x 12 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Weight (lb. / kg)

Net: 60/27.2

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 15.54/394.7, Width (rear): 8.75/222, Depth: 14.75/374.7,
Trap. Angle (degrees per side): 15

MK2396i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

65 – 20k

Power Handling / Impedance (Watts @ Ohms)

LF: 600 @ 8, HF: 150 @ 8, Full Range: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF – 1x 12 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 60/27.2

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 15.54/394.7, Width (rear): 8.75/222, Depth: 14.75/374.7,
Trap. Angle (degrees per side): 15

MK2399i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

65 – 18k

Power Handling / Impedance (Watts @ Ohms)

LF: 600 @ 8, HF: 150 @ 8, Full Range: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 90. Vertical: 90

Subsystems

Transducer: LF – 1x 12 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 60/27.2

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 15.54/394.7, Width (rear): 8.75/222, Depth: 14.75/374.7, Trap. Angle (degrees per side): 15

MK5326i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

48Hz – 17KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 120, Vertical: 60

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK5364i

passive 3-way full-range loudspeaker

Operating Range

48 – 17k

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 60, Vertical: 45

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified or passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK5366i

passive 3-way full-range loudspeaker

Operating Range

48Hz – 17KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 60, Vertical: 60

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK5394i

passive 3-way full-range loudspeaker

Operating Range

48Hz – 16KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 45

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK5396i

passive 3-way full-range loudspeaker

Operating Range

48Hz – 19KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK5399i

passive 3-way full-range loudspeaker

Operating Range

48Hz – 18KHz

Power Handling / Impedance (Watts @ Ohms)

LF: 800 @ 8, HF: 150 @ 8, Full Range: 800 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 90

Subsystems

Transducer: LF – 1x 15 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
Loading: LF – Vented; HF – Horn-loaded

Powering

Switchable: bi-amplified/passive

Weight (lb. / kg)

Net: 77/34.9

Dimensions (inches/millimeters)

Height: 30.00/762, Width (front): 18.71/475, Width (rear): 8.88/226, Depth: 19.73/501, Trap. Angle (degrees per side): 15

MK8126i

120×60 PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

60Hz – 18KHz

Power Handling / Impedance (Watts @ Ohms)

Full Range: 300 @ 8

Nominal Coverage (degrees)

Horizontal: 120, Vertical: 60

Subsystems

Transducer: LF – 1x 8 in. cone; HF – 1x 1-in exit/1.5-in voice coil compression driver on CD horn, Loading: LF – Vented; HF – Horn-loaded

Powering

Full range

Weight (lb. / kg)

Net: 31/14.1

Dimensions (inches/millimeters)

Height: 19.75/502, Width (front): 11.75/299, Width (rear): 6.00/152, Depth: 11.03/280, Trap. Angle (degrees per side): 22.5

MK8196i

PASSIVE 2-WAY FULL-RANGE LOUDSPEAKER

Operating Range

60Hz – 18KHz

Power Handling / Impedance (Watts @ Ohms)

Full Range: 300 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF – 1x 8 in. cone; HF – 1x 1-in exit/1.5-in voice coil compression driver on CD horn, Loading: LF – Vented; HF – Horn-loaded

Powering

Full range

Weight (lb. / kg)

Net: 31/14.1

Dimensions (inches/millimeters)

Height: 19.75/502, Width (front): 11.75/299, Width (rear): 6.00/152, Depth: 11.03/280, Trap. Angle (degrees per side): 22.5

Talk to EAW

Got a general enquiry? Looking for design help? Want to locate spare parts? We’re ready to talk. Help. And make sure you’re happy.