UX8800

DIGITAL SIGNAL PROCESSOR

The UX8800 provides a complete suite of state-of-the art, digital signal processing tools. Additional capabilities and features set the UX8800 apart as the head end processor for large systems with a variety of output channels and for processing specific, EAW loudspeakers.

In System Processor mode, user-adjustable functions include the expected range of processing tools, such as EQ filters, delay, gain, crossovers, and polarity. However, these functions are implemented using custom-designed algorithms to optimize their usefulness when applied to loudspeakers. For example, unlike many bell filter designs, the UX8800’s produce a flat frequency response when reciprocal cut and boost filters are overlaid. Also, to more accurately calculate signal delay distances, a temperature setting compensates for sound speed differences.

In Loudspeaker Processor mode, preset processing is available for specific EAW loudspeakers and loudspeaker arrays. The UX8800 hardware is designed to implement EAW’s innovative EAW Focusing™ as part of the preset processing to correct loudspeaker anomalies that cannot be corrected with conventional digital processing. Advanced limiting is designed to maintain sound quality while achieving maximum output levels based on amplifier outputs and. An ambient humidity setting provides appropriate air loss equalization based on listening distances.

While the output settings are locked to prevent inadvertent or purposeful modification, the user retains control of input gain, EQ, signal delay, and polarity for the entire loudspeaker. This mode’s simplicity makes the UX8800 practical for entry level users and fast to operate for experienced users, providing a high degree of system consistency while retaining all necessary, user adjustable, alignment controls.

The UX8800 uses standard Ethernet protocol and CAT-5 cabling for computer control using the custom EAWPilot software. A unique design that permits plug-and-play Ethernet communication without having to deal with problematic IP addresses. In addition, both audio and control signals can be transmitted between additional processors and other EAW products using the built-in, 32-channel, U-Net network and standard CAT-5 cabling. Up to 254 devices can be linked using U-Net, all controlled by EAWPilot.

Two year warranty.

  • Two operational modes:
  • System Processor – All signal processing is user-adjustable.
  • Loudspeaker Processor – Preset signal processing for EAW loudspeakers with Gunness Focusing™ to optimize performance.
  • Comprehensive, intuitive front panel control makes computer control unnecessary for most adjustments.
  • U-Net – EAW-designed signal and control networking between UX8800s and other U-Net enabled products.
  • Digital inputs to reduce A/D & D/A stages.
  • EAWPilot software for comprehensive computer control.
  • Filter parameters are compatible with EAW’s modeling and alignment software for optimized performance.
UX8800

The UX8800 provides a complete suite of state-of-the art, digital signal processing tools. Additional capabilities and features set the UX8800 apart as the head end processor for large systems with a variety of output channels and for processing specific, EAW loudspeakers.

In System Processor mode, user-adjustable functions include the expected range of processing tools, such as EQ filters, delay, gain, crossovers, and polarity. However, these functions are implemented using custom-designed algorithms to optimize their usefulness when applied to loudspeakers. For example, unlike many bell filter designs, the UX8800’s produce a flat frequency response when reciprocal cut and boost filters are overlaid. Also, to more accurately calculate signal delay distances, a temperature setting compensates for sound speed differences.

In Loudspeaker Processor mode, preset processing is available for specific EAW loudspeakers and loudspeaker arrays. The UX8800 hardware is designed to implement EAW’s innovative EAW Focusing™ as part of the preset processing to correct loudspeaker anomalies that cannot be corrected with conventional digital processing. Advanced limiting is designed to maintain sound quality while achieving maximum output levels based on amplifier outputs and. An ambient humidity setting provides appropriate air loss equalization based on listening distances.

While the output settings are locked to prevent inadvertent or purposeful modification, the user retains control of input gain, EQ, signal delay, and polarity for the entire loudspeaker. This mode’s simplicity makes the UX8800 practical for entry level users and fast to operate for experienced users, providing a high degree of system consistency while retaining all necessary, user adjustable, alignment controls.

The UX8800 uses standard Ethernet protocol and CAT-5 cabling for computer control using the custom EAWPilot software. A unique design that permits plug-and-play Ethernet communication without having to deal with problematic IP addresses. In addition, both audio and control signals can be transmitted between additional processors and other EAW products using the built-in, 32-channel, U-Net network and standard CAT-5 cabling. Up to 254 devices can be linked using U-Net, all controlled by EAWPilot.

Two year warranty.

  • Two operational modes:
  • System Processor – All signal processing is user-adjustable.
  • Loudspeaker Processor – Preset signal processing for EAW loudspeakers with Gunness Focusing™ to optimize performance.
  • Comprehensive, intuitive front panel control makes computer control unnecessary for most adjustments.
  • U-Net – EAW-designed signal and control networking between UX8800s and other U-Net enabled products.
  • Digital inputs to reduce A/D & D/A stages.
  • EAWPilot software for comprehensive computer control.
  • Filter parameters are compatible with EAW’s modeling and alignment software for optimized performance.

Specifications

INPUTS (4x)

Analog Mode Type: Electronically balanced
Connector: 4x XLR female
Impedance: 20k ohm(balanced), 10k ohm (unbalanced)
CMR: 80 dB, 1 kHz >50 dB, 30 Hz to 20 kHz
Crosstalk: -110 dB, 1 kHz
Maximum Level: 18 dBu, 6.2 V
Analog to Digital Converters: (4x)
Resolution/Sampling: 24 bit, 48 kHz
Digital Mode Type: AES/EBU Transformer and DC isolated
Connector: 2x XLR female
Impedance: 110 ohm
Nominal Level: 2 V to 7 V peak-to-peak
Sampling Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz 1
U-Net Digital Type: Proprietary 32 channel
Connector: 2x RJ-45
Sampling Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz 1

OUTPUTS (8x)

Analog Type: Electronically balanced
Connector: 8x XLR male
Impedance: <50 ohm Crosstalk: -115 dB, 1 kHz Max Level: 18 dBu, 6.2 V @ >600 ohm load
Absolute Min Load: >50 Ohm / 20 nf)
Digital to Analog Converters: (8x)
Resolution/Sampling: 24 bit, 48 kHz
U-Net Digital Type: Proprietary 32 channel
Connector: 2x RJ-45
Sampling Rate: 48 kHz

DIGITAL PROCESSING

Processor: 50 Mflop, 32 bit, 48 kHz Sharc
Latency: 3.13 ms

NETWORKING

(Communication / Control)
Type: Ethernet (10/100 Mbps) 1x RJ-45 front panel
U-Net: U-net 2x RJ-45 rear panel
Network Protocols: TCP/IP static / dynamic
Control Software: EAWPilot

Operating Range

15 Hz to 22 kHz, +/-0.25 dB
THD + Noise: <0.005%, 20 Hz to 20 kHz, +10 dBu output Channel Separation: 80 dB, 20 Hz to 20 kHz Dynamic Range: >114 dB, A-weighted, analog/digital in to analog out

Versions

UX8800 100-240 VAC 0018650-00

Dimensions (inches/millimeters)

Height: 1.72/44 (1RU)
Width: 17.32/440
Depth: 13.3/338

Weights (pounds/kilograms)

Net: 10/4.5
Shipping: 12/5.4

UX Series SERIES

UX3600

DIGITAL SIGNAL PROCESSOR

Weight (lb. / kg)

Net: 10/4.5

Dimensions (imperial / metric)

Height: 1.72/44 (1RU), Width: 17.32/440, Depth: 13.3/338

Inputs

XLR female analog or AES/EBU, DanteTM enabled

Outputs

8x XLR male

UX8800

DIGITAL SIGNAL PROCESSOR

Weight (lb. / kg)

Net: 10/4.5

Dimensions (imperial / metric)

Height: 1.72/44 (1RU), Width: 17.32/440, Depth: 13.3/338

Operating Range

30 – 150

Calculated Maximum Output Peak

Sub (whole space): 129

Power Handling/Impedance (Watts @ Ohms)

Sub (single amp): 800 @ 8

Subsystems

Transducer: SUB 1x 18 in. cone, Loading: Vented

Weight (lb. / kg)

Net: 89/40.4

Dimensions (imperial / metric)

Height (front): 27.96/710, Height (rear): 15.87/403, Width (front): 27.96/710, Width (rear): 15.87/403, Depth: 23.82/605,
Trap. Angle (degrees per side): 19.9, Trap. Angle (degrees top and bottom): 19.9

Talk to EAW

Got a general enquiry? Looking for design help? Want to locate spare parts? We’re ready to talk. Help. And make sure you’re happy.