VFS250i

SUBWOOFER

The VFS “i” revision brings the VF concept more fully into the EAW product line. VFS “i” Series black versions use handles from the KF and JF Series. An installation only white version comes without handles or a pole mount cup.

The VFS250i sub bass system includes dual, direct radiating 15-in LF cone transducers mounted in an optimally vented enclosure. Enclosure venting uses the enclosure’s resonance to enhance LF response while limiting driver wear.

The VFS250i black version includes traditional portable features such as a pole-mount cup, parallel NL4 4-terminal connectors, barrier strip inputs and handles that accept accessory covers for permanent installation. The white, installation-only versions omit handles and the pole-mount cup but include NL4 connector, barrier strip inputs and multiple mounting points. The new design leaves the enclosure sides completely smooth and attractive. Optional rigging hardware is available for preconfigured arrays of VFR and VFS systems.

  • Six year warranty
  • High output sub bass system
  • Dual 15-in cone transducers
  • Optimally vented for increased response
  • Extended pole mount cup creates stable base
  • Easy lift handles (Black version only)
VFS250i

The VFS “i” revision brings the VF concept more fully into the EAW product line. VFS “i” Series black versions use handles from the KF and JF Series. An installation only white version comes without handles or a pole mount cup.

The VFS250i sub bass system includes dual, direct radiating 15-in LF cone transducers mounted in an optimally vented enclosure. Enclosure venting uses the enclosure’s resonance to enhance LF response while limiting driver wear.

The VFS250i black version includes traditional portable features such as a pole-mount cup, parallel NL4 4-terminal connectors, barrier strip inputs and handles that accept accessory covers for permanent installation. The white, installation-only versions omit handles and the pole-mount cup but include NL4 connector, barrier strip inputs and multiple mounting points. The new design leaves the enclosure sides completely smooth and attractive. Optional rigging hardware is available for preconfigured arrays of VFR and VFS systems.

  • Six year warranty
  • High output sub bass system
  • Dual 15-in cone transducers
  • Optimally vented for increased response
  • Extended pole mount cup creates stable base
  • Easy lift handles (Black version only)

Specifications

Subsystem

Transducer: SUB 2x 15 in cone
Loading: Vented

Operating Mode

Amplifier Channels: Single-amp LF/LF
External Signal Processing: DSP w/1-way filter

Operating Range (-10 dB, Hz)

30 – 160

Axial Sensitivity (1W @ 1m, dB SPL)

Sub (whole space): 99

Power Handling / Impedance (Watts @ Ohms)

Sub – Single Amp: 900 @ 4

Calculated Maximum Output Peak (dB SPL)

Sub (whole space): 134

Calculated Maximum Output Long Term (dB SPL)

Sub (whole space): 128

Versions

VFS250i Black 2041017-90
VFS250i White 2041032-90

VF Series SERIES

VFM109i

PASSIVE TWO-WAY STAGE MONITOR

Operating Range

70 – 20k

Power Handling / Impedance (Watts @ Ohms)

Full Range Passive: 500 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF 1x 10-in cone; HF 1x 1-in exit, 1.75-in voice coil compression driver
Loading: LF Vented; HF Horn-loaded

Weight (lb. / kg)

Net: 32/14.5

Dimensions (inches/millimeters)

Height (stage): 14.9/378, Width: 12.5, Depth: 17.9/454, Floor Angle (degrees up): 37

VFM129i

PASSIVE TWO-WAY STAGE MONITOR

Operating Range

65 – 20k

Power Handling / Impedance (Watts @ Ohms)

Full Range Passive: 500 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF 1x 12-in cone; HF 1x 1-in exit, 1.75-in voice coil compression driver
Loading: LF Vented; HF Horn-loaded

Weight (lb. / kg)

Net: 40/18.1

Dimensions (inches/millimeters)

Height (stage): 17.3/439, Width: 14.8/375, Depth: 21.3/542, Floor Angle (degrees up): 37

VFM159i

PASSIVE TWO-WAY STAGE MONITOR

Operating Range

63 – 20k

Power Handling / Impedance (Watts @ Ohms)

Full Range Passive: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF 1x 15-in cone; HF 1x 1-in exit, 1.75-in voice coil compression driver
Loading: LF Vented; HF Horn-loaded

Weight (lb. / kg)

Net: 49/22.2

Dimensions (inches/millimeters)

Height (stage): 19.3/489, Width: 17.5/445, Depth: 23.4/596, Floor Angle (degrees up): 37

VFR109i

PASSIVE TWO-WAY ENCLOSURE

Operating Range

65 – 20k

Power Handling / Impedance (Watts @ Ohms)

Full Range Passive: 500 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF 1x 10-in cone; HF 1x 1-in exit, 1.75-in voice coil compression driver
Loading: LF Vented; HF Horn-loaded

Weight (lb. / kg)

Net: 37/16.8

Dimensions (inches/millimeters)

Height: 19.9/506, Width (front): 12.8/325, Width (rear): 6.1/156, Depth: 13.1/332, Trap. Angle (degrees per side): 15

VFR129i

PASSIVE TWO-WAY ENCLOSURE

Operating Range

50 – 20k

Power Handling / Impedance (Watts @ Ohms)

Full Range Passive: 500 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF 1x 12-in cone; HF 1x 1-in exit, 1.75-in voice coil compression driver
Loading: LF Vented; HF Horn-loaded

Weight (lb. / kg)

Net: 54/24.5

Dimensions (inches/millimeters)

Height: 25.69/659, Width (front): 16.2/412, Width (rear): 7.8/199, Depth: 16.4/417, Trap. Angle (degrees per side): 15

VFR159i

PASSIVE TWO-WAY TRAPEZOIDAL ENCLOSURE

Operating Range

54 – 20k

Power Handling / Impedance (Watts @ Ohms)

Full Range Passive: 600 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 60

Subsystems

Transducer: LF 1x 15-in cone; HF 1x 1-in exit, 1.75-in voice coil compression driver
Loading: LF Vented; HF Horn-loaded

Weight (lb. / kg)

Net (approx.): 60/27.2

Dimensions (inches/millimeters)

Height: 28.3/720, Width (front): 20.1/511, Width (rear): 10.7/272, Depth: 18.3/464, Trap. Angle (degrees per side): 15

VFR69i

PASSIVE TWO-WAY ENCLOSURE

Operating Range

70 – 20k

Power Handling / Impedance (Watts @ Ohms)

Full Range Passive: 250 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 50

Subsystems

Transducer: LF 1x 6-in cone; HF 1x 1-in exit, 1.25-in voice coil compression driver
Loading: LF Vented; HF Horn-loaded

Weight (lb. / kg)

Net: 15/6.8

Dimensions (inches/millimeters)

Height: 14.8/375, Width (front): 8.88/225.5, Width (rear): 6.1/155, Depth: 8.4/214, Trap. Angle (degrees per side): 10

VFR89i

PASSIVE TWO-WAY ENCLOSURE

Operating Range

70 – 20k

Power Handling / Impedance (Watts @ Ohms)

Full Range Passive: 325 @ 8

Nominal Coverage (degrees)

Horizontal: 90, Vertical: 50

Subsystems

Transducer: LF 1x 8-in cone; HF 1x 1-in exit, 1.25-in voice coil compression driver
Loading: LF Vented; HF Horn-loaded

Weight (lb. / kg)

Net: 22/10

Dimensions (inches/millimeters)

Height: 16.1/410, Width (front): 10.1/257, Width (rear): 5.2/133, Depth: 9.8/249, Trap. Angle (degrees per side): 15

VFS220i

SUBWOOFER

Operating Range

33 – 154

Power Handling / Impedance (Watts @ Ohms)

Sub – Single Amp: 1000 @ 4

Subsystems

Transducer: SUB 2x 12 in. cone
Loading: Vented

VFS250i

SUBWOOFER

Operating Range

30 – 160

Power Handling / Impedance (Watts @ Ohms)

Sub – Single Amp: 900 @ 4

Subsystems

Transducer: SUB 2x 15 in cone
Loading: Vented

Talk to EAW

Got a general enquiry? Looking for design help? Want to locate spare parts? We’re ready to talk. Help. And make sure you’re happy.